Thrust Roller Bearings Manufacturer
  • Address155473 Alpha Drive Highland Heights, OH
  • Factory Address155473 Alpha Drive Highland Heights, OH
  • Phone(Working Time)800 589 1236
  • Phone(Nonworking Time)800 589 1236
  • Fax800 589 1236

Company Profile

Readily available with round or round rollers, Thrust Roller Bearings Maker sustain just axial loads, but they are suitable for heavy loads and have high axial rigidity. Round thrust roller bearings contain convex rollers and have a self- lining up ability and are without any impact of installing mistake or shaft deflection. Standard cages are machined brass, where the E-type uses a pushed cage for high load capability.
Thrust Cylindrical Roller Bearings
These are thrust bearings consisting of round rollers. They can sustain only axial loads, however they are suitable for heavy loads and have high axial rigidness.
The cages are machined brass.
Thrust Spherical Roller Bearings
Thrust Spherical Roller Bearings

Company Details

  • 147
  • North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe, Central America, Northern Europe, Southern Europe, South Asia, Domestic Market
  • THRUST BEARINGS
  • 14789
  • 1147899
  • 1981
  • 120230.0.0.00321230.

History

These are thrust bearings including convex rollers. They have a self-aligning capability and are devoid of any influence of installing mistake or shaft deflection. Besides the original type, the E type with pressed cages for high load capacity is likewise offered. Their bearing numbers are suffixed by E.
For horizontal shaft or high speed application, machined brass cages are advised. For information, contact Thrust Roller Bearings Manufacturer. Since there are numerous locations where lubrication is tough, such as the location between the roller heads and inner ring rib, the sliding surface areas between cage and guide sleeve, etc., oil lubrication ought to be utilized even at low speed. The cages in the original type are machined brass.

Service

Thrust bearings are created to accommodate axial load in one or both directions. The single performing carries the load in one instructions while the double performing can carry load in both directions. There are several style types and configurations to suit a variety of load capabilities and applications. The Ball Thrust series is readily available in ABMA Inch series, ISO Metric series, and Angular Contact series. The single acting Inch and Metric series are capable of dealing with reasonably light loads in one direction while the Angular Contact series can deal with a mix of radial and thrust loads in one or both directions. The Round Roller Thrust series is produced in Inch, Metric, Self-Aligning, Crane Hook, and Specialized series, Single and Double Acting. Using the round roller design permits higher thrust load capacities than the exact same sized ball thrust bearing. This greater capability makes them ideal for a wide range of applications and markets. Our Tapered Roller Thrust Bearings with high load capacities are suitable for lots of applications where heavy thrust loads are encountered in the application. These are commonly used in heavy applications such as coal crushing, rock crushing, plastic extrusion, and in rolling mill stands. Due to the fact that of the heavy loads and extreme task, a number of these are produced with case hardened components for more resilience. Please speak with American for specific design attributes for each type or let us assist with application assistance today.

Our Team